The Intelligent Salt Density Tester , also known as the direct-reading salt density tester (Salt Densitometer), is designed to test the equivalent salt density of insulators. The built-in insulator equivalent salt density calculation formula is built in the system and the reading is intuitive. Using the Chinese menu, the operation is simple. The instrument comes with a mini-printer for easy data retention and comparison. Large-screen LCD display, all parameters and results at a glance. Built-in large-capacity lithium battery for field testing. Intelligent Salt Density Tester Measurement Range Salt density: 0.0001mg/cm?～9.99999mg/cm? (According to X-4.5 type insulator) Temperature: 0°C to 99°C Conductivity: 0.0001μs/cm～ 200000μs/cm 4.2 Measurement Accuracy Salt density: resolution of 0.0001 bits, full-scale accuracy better than ± 2% Temperature: 0.1 bit resolution, accuracy better than ±0.5°C Conductivity: Resolution is 1/1000 of the range, full-scale accuracy is better than ± 0.5% Note: When testing low concentration solution, use electrode with small electrode constant K value; when testing high concentration solution, use electrode with large electrode constant K value. Detailed selection see the accessories section. 4.3 Display output mode A. LCD display measurement results. B. The printer can output measurement data directly. C. Upload data to a computer for processing. 4.4 Conditions of use Ambient temperature: 0°C to 50°C Relative humidity: ≤80% Power supply: internal rechargeable battery, AC220V ±10% can also be used Volume: 315mm × 280mm × 140mm Weight: about 3KG Stainless Steel Woven Wire,Stainless Steel Mesh Screen,Stainless Woven Mesh,Stainless Woven Wire Mesh Balanat Import&Export Co.,Ltd. , https://www.balanatwiremesh.com