XCMG XM1003K milling machine has strong power, lower fuel consumption and more economical use. It has higher power reserve and deep milling than domestic products.
With a milling drum with a diameter of 930mm, the maximum milling depth is 300mm, which can remove the entire asphalt concrete pavement at one time, and the operation is efficient.

Xugong adopts a four-wheel full hydraulic walking system to provide strong traction. The mechanical belt drives the milling drum, which has higher transmission efficiency than the hydraulic transmission. It has a power adaptive function and automatically adjusts the speed according to working conditions. Maximize job efficiency. reliable quality. It has strong adaptability and can climb the flatbed by itself, eliminating the cost of lifting; the minimum milling radius is 1.5 meters, and the construction in the narrow area is more flexible; the mechanical folding and conveying device makes the transfer more convenient; the right leg can be placed into the rack. Achieve milling. Comfortable operation, LCD display, parameter display and fault alarm; electronically controlled walking handle, comfortable operation and precise control; noise is lower than national standards, maintenance personnel health, and less impact on surrounding residents.

After nearly ten years of technological innovation and industrial accumulation, XM1003K large-scale road milling machine inherits the best genes of XCMG XM series milling machine, which can effectively remove road congestion, oil waves, netting, rutting, etc. Excavation of pavement pits and grooves; it can also be used for the roughening of cement pavements and the milling of surface faults. The equipment has high working efficiency, simple construction process, easy milling control depth, convenient and flexible operation, good maneuverability, and the old material of milling can be directly recycled.


HWS Anti-corrosion Pipeline Heat Shrink Sleeve

Product Introduction:
HWS Anti-corrosion Pipeline Heat Shrink Sleeve is also known as heat shrink weld belt/Heat shrinkable weld sleeve (belt), made by irradiation cross-linked polyolefin base material and special sealing hot melt adhesive. WHR Three Layers Heat Shrink Sleeve For Anti-corrosion it has high mechanical strength, stable performance, aging resistance, anti chemical corrosion, sealing, strong adhesive strength, easy to operate, etc.
 
Product Application:
 HWS Heat Shrinkable Joint Sleeve For Steel Pipeline

a) Pipeline Engineering Tubing Apply to petroleum, nature gas, chemical engineering, fuel gas and others project pipeline network for anti-corrosion of steel pipeline repaired and welded junction.And also apply to corrosion resistant coating for repairing the breakage.
b) Apply to 2PE, 3PE, FBE,PP,CTE anti-corrosion coating pipeline for anti-corrosion of welded junction and bend area.
 
Specification:
When using the heat shrink sleeves, first preheat the pipeline up to 55 degrees Celsius~60 degrees Celsius, and then wrap the joint belt around the treated pipeline with the heat shrink joint belt, make sure that the heat shrink joint belt lap width is more than 50mm, it will shrink at radial direction when the heat effects on it, at the same time the hot melt adhesive start to melt, fill and cover the surface of the pipeline, form continuous and close anti-corrosion system with original pipeline anti-corrosion coating.

Executive Standard: SY/T0413-2002 and SY/T4054-2003 and GB-T23257-2009.
 
Features & Benefits
a) excellent adhesion ability, adhesion range is wide: can adhere with steel, PE, epoxy coating, etc.
b) strong in corrosion resistance:can effectively block a variety of medium permeability and corrosion, aging resistance, environment stress cracking resistance, resistance to UV irradiation.
c) High mechanical strength: compression resistance, shock resistance, shear resistance.
d) Wide use range: can instruct at -25~35 degrees Celsius temperature range.
e) No volatilization, safety in use, can save energy, can protect environment
f) Long service life.
g) Shrink fast, easy to operate, simple to install.
h) low preheat temperature: when preheat -55~60 degrees Celsius, can install it to shrink.

 Other size can customized according to customers' request.

HWS Anti-corrosion Pipeline Heat Shrink Sleeve



Pipeline Engineering Tubing/sleeves

Pipeline Engineering Tubing,Pipeline Insulation Tape,Heat Shrink Polyethylene,Polyethylene Terephthalate Tubing

KEYUACE Materials Co., Ltd. , https://www.insulationtubing.com