24V 11kw 12t Starter for Motor Nikko Lester 19834

We control the raw material with strict standard, especially for the copper wire. We use 10# steel and good magnet materials.
 
Production Equipment:
 
The armature and stator are produced by automatic equipment.
 
Inspection equipment:
 
We have more than 60 quality inspection equipment. We can inspect all items according to starter GB standard and analyze the quality differences.
 
Armature, stator, solenoid switch and the starter assembly are all 100% inspected.
 
Whole set laboratory equipment:
 
We have whole set laboratory equipment for the starter performance test.
 
Market share:
 
We are No 1 for single cylinder diesel engine starter production in China. The annual selling quantity is more than 400000 sets.
 
Experiences:
Plentiful Experience to ensure quality
Most of our workers are with more than 10 years even 20 years experiences.
Our R&D engineers are also with more than 20 years experiences.
 
9.  After-sales service:
Good and fast response for after- sale Services
Once we receive quality problems complaint, we will reply customer within 5 hours, if domestic customers, we our engineers will go to solve the problem in the spot as quick as possible.
Competitive price ------
 
Over 90% parts produced by our own factory
 
Regular Starters, Next Day Delivery.
Save Money Repair it, Do not replace it.
1 year warranty
100% brand new product
   
Major product family: 
    Alt: CS, AD, ND, Ford, SI, Leece Neville, Marelli, Bosch, Valeo, Mitsubishi, Lucas, etc.
    Str: Ford PMGR, PG260D/G/L/F1/F2/M, Bosch, Valeo, Mitsubishi, etc.
 Market (%): 
     North America 60%; Middle East 15%; Europe 15%; Local 10%.
 
 
We are specialized in Auto alternator and starter motor since 2000. Quality first, price second. Usually, our alternator and starter motor can match with each other smoothly in the same model Vehicle.
 
Our company boasts a high-quality management team from top to bottom for the purpose of an efficient operation system. We control every part and every working procedure strictly because we regard product quality as a basis of our corporate development. Based on the original ISO9001: 2000 International Quality Management System, all links of our production and management are strictly guided by the standard of ISO/TS16949 We control the raw material with strict standard, especially for the copper wire. We use 10# steel and good magnet materials.
 
Production Equipment:
 
The armature and stator are produced by automatic equipment.
 
Inspection equipment:
 
We have more than 60 quality inspection equipment. We can inspect all items according to starter GB standard and analyze the quality differences.
 
Armature, stator, solenoid switch and the starter assembly are all 100% inspected.
 
Whole set laboratory equipment:
 
We have whole set laboratory equipment for the starter performance test.
 
Market share:
 
We are No 1 for single cylinder diesel engine starter production in China. The annual selling quantity is more than 400000 sets.
 
Experiences:
Plentiful Experience to ensure quality
Most of our workers are with more than 10 years even 20 years experiences.
Our R&D engineers are also with more than 20 years experiences.
 
9.  After-sales service:
Good and fast response for after- sale Services
Once we receive quality problems complaint, we will reply customer within 5 hours, if domestic customers, we our engineers will go to solve the problem in the spot as quick as possible.
Competitive price ------
 
Over 90% parts produced by our own factory
 
Regular Starters, Next Day Delivery.
Save Money Repair it, Do not replace it.
1 year warranty
100% brand new product
   
Major product family: 
    Alt: CS, AD, ND, Ford, SI, Leece Neville, Marelli, Bosch, Valeo, Mitsubishi, Lucas, etc.
    Str: Ford PMGR, PG260D/G/L/F1/F2/M, Bosch, Valeo, Mitsubishi, etc.
 Market (%): 
     North America 60%; Middle East 15%; Europe 15%; Local 10%.
 
 
We are specialized in Auto alternator and starter motor since 2000. Quality first, price second. Usually, our alternator and starter motor can match with each other smoothly in the same model Vehicle.
 
Our company boasts a high-quality management team from top to bottom for the purpose of an efficient operation system. We control every part and every working procedure strictly because we regard product quality as a basis of our corporate development. Based on the original ISO9001: 2000 International Quality Management System, all links of our production and management are strictly guided by the standard of ISO/TS16949

Fin Die consists of draw satation, pierce extrude station, reflare satation, edge trim, slit, dual feed (fixed and movable), and cutoff station. The fin surface is accomplished in the last draw station by removable plate, The die stays in the press during plate changes. The die further features the latest version of draw station adjustment. Each station can be individual adjusted using a dial adjustment gauge. The draw dials are calibrated, as is the reflare adjustment dial. Our digital position indicator design will be included on all draw and reflare dials, which greatly improves the visibility and ease of adjustment.

These features allow for extremely fast changes from one collar height setting to another. We also will furnish ball bushings in the main die set as serviceable pillar style bearings. Air is used in the pierce extrude station to clear slugs and scrub the walls of the extrude bushings. Air is also used in the edge trim station to eject scrap. PIERCE PUNCH LUBRICATION SYSTEM (STANDARD) We provide the piece punch lubrication system to extra protect the punches and dies.

This features a reservoir and necessary plumping to induce air and lubricant through the pierce punches automatically. This will assist to remove the round pierced Slug plus lubricate the punch during entry and withdraw from the pierce dies. This is especially necessary when running any type of evaporative fin stock lubricant. A low level switch and pilot light indicator on the touching screen are designed. QUICK DIE CHANGE (STANDARD) Our fin line is designed and manufactured for rapid die exchange. One man with two hours will be enough for skilled operator. Nearly all changes are of a fixed position nature to virtually eliminate adjusting things to get the dies running with the line. SEPARATE SLIT ADJUSTMENT (STANDARD) A set of slit design upper blades can be positioned from 1,2,3,4,5,6,7 and more as Fin Dies sepecification SPEICAL TOOL STEEL (TOOLING) The die will be designed in tooling items named ASP30, for example, Punches, Die inserts, Slitter blades and other blades.

Fin Dies

Fin Die, Fin Dies, Fin Mould, Mechanical Fin Dies

Satis Products Co., Ltd. , https://www.satismachinery.com