Model NO.: AFR/BFR Series (AFR1500/AFR2000; BFR2000-BFR4000)
Work Temperature: Normal Temperature
Material: Aluminum
Port Size: 1/8", 1/4", 3/8", 1/2"
Type: Source Treatment Unit
Trademark: XCPC
Transport Package: Carton, Wooden Case, Pallet, Seal Paper
Specification: ISO9001: 2008; CE; SGS
Origin: Ningbo, China
HS Code: 84219990
Model NO.: AFR/BFR Series (AFR1500/AFR2000; BFR2000-BFR4000)
Work Temperature: Normal Temperature
Material: Aluminum
Port Size: 1/8", 1/4", 3/8", 1/2"
Type: Source Treatment Unit
Trademark: XCPC
Transport Package: Carton, Wooden Case, Pallet, Seal Paper
Specification: ISO9001: 2008; CE; SGS
Origin: Ningbo, China
HS Code: 84219990
AFR/BFR series Air Filter Combination-Air Filter Regulator(Airtac type)

1. Festures:

1). Light and hany and compact structure, convenience for installation and using

2). Press in self-locking structure to protect adjustable pressure from outside disturbing

3). Small pressure loss, high efficient water separate

4). Standard filter precision: 40 micron (5 micron also optional)

Air Filter Combination-AFR/BFR Series Filter Regulator (Airtac Type)

Air Filter Combination-AFR/BFR Series Filter Regulator (Airtac Type)

Air Filter Combination-AFR/BFR Series Filter Regulator (Airtac Type)

2. Specifications:

1). Model: AFR1500, AFR2000, BFR2000, BFR3000, BFR4000

2). Operating fliud: 1/8", 1/4", 3/8", 1/2"

3). Adjustable pressure range: 0.05~0.85Mpa

4). Max. Adjustable pressure: 0.95MPa

5). Ensured pressure resistance: 1.5MPa

6). Operating temperature range: 5~60oC

7). Combination: AF, AR, BF, BR

8). Material: Body: Aluminum die-casting forming
Pretective Cup Cover: AFR series(without); BFR series: Iron
Container Cup: PE

Other related series for the type:

AC/BC
AFC/BFC
AF/BF
AR/BR
AL/BL

Other air filter combination also available for you,

1). XO series (FESTO FRL)
2). XA series (SMC FRL)
3). XG series (AIRTAC FRL)
4). XMA series
5). XAC series (MINDMAN FRL)
6). XU series (SHAKO FRL)
7). XS series (SNS FRL)
8). XC series (CAMOZZI FRL)
9). Others FRL

More information, you can contact me to get the details.

XCPC is your good choice in Pneumatic Area!

Air Filter Combination-AFR/BFR Series Filter Regulator (Airtac Type) AFR/BFR series Air Filter Combination-Air Filter Regulator(Airtac type)

1. Festures:

1). Light and hany and compact structure, convenience for installation and using

2). Press in self-locking structure to protect adjustable pressure from outside disturbing

3). Small pressure loss, high efficient water separate

4). Standard filter precision: 40 micron (5 micron also optional)

Air Filter Combination-AFR/BFR Series Filter Regulator (Airtac Type)

Air Filter Combination-AFR/BFR Series Filter Regulator (Airtac Type)

Air Filter Combination-AFR/BFR Series Filter Regulator (Airtac Type)

2. Specifications:

1). Model: AFR1500, AFR2000, BFR2000, BFR3000, BFR4000

2). Operating fliud: 1/8", 1/4", 3/8", 1/2"

3). Adjustable pressure range: 0.05~0.85Mpa

4). Max. Adjustable pressure: 0.95MPa

5). Ensured pressure resistance: 1.5MPa

6). Operating temperature range: 5~60oC

7). Combination: AF, AR, BF, BR

8). Material: Body: Aluminum die-casting forming
Pretective Cup Cover: AFR series(without); BFR series: Iron
Container Cup: PE

Other related series for the type:

AC/BC
AFC/BFC
AF/BF
AR/BR
AL/BL

Other air filter combination also available for you,

1). XO series (FESTO FRL)
2). XA series (SMC FRL)
3). XG series (AIRTAC FRL)
4). XMA series
5). XAC series (MINDMAN FRL)
6). XU series (SHAKO FRL)
7). XS series (SNS FRL)
8). XC series (CAMOZZI FRL)
9). Others FRL

More information, you can contact me to get the details.

XCPC is your good choice in Pneumatic Area!

Air Filter Combination-AFR/BFR Series Filter Regulator (Airtac Type)

Stainless Steel Reaming Parts

When reaming stainless steel, the problems that are often encountered are: grooves are easy to be drawn on the surface of the hole, the roughness is poor, the aperture is out of tolerance, it is bell mouth, and the reamer is easy to wear. Different types of stainless steel have different machinability, and the problems in reaming are also different. For example, when reaming austenitic stainless steel such as 1Cr18Ni9Ti and stainless steel resistant to concentrated nitric acid, the main problem is reamer wear; while for 2Cr13, etc. When reaming martensitic stainless steel, the main problem is that it is not easy to ensure the roughness and dimensional accuracy of the reaming hole. To avoid these problems, the following should be noted:
1. Reasonable selection of reamer and reaming amount is the key to ensure the smooth progress of reaming.
2. Improve the quality of the pre-processing process and prevent the occurrence of grooves, ellipses, polygons, tapers or bell mouths, waist drum shapes, axis line bending, deflection and other phenomena in the pre-processing holes.
3. Keep the hardness of the workpiece material moderate, especially for 2Cr13 martensitic stainless steel, the hardness after quenching and tempering treatment is preferably below HRC28.
4. To install the reamer and the workpiece correctly, the reamer must be installed correctly, and the axis of the reamer should be consistent with the axis of the pre-machined hole of the workpiece to ensure uniform cutting of each cutter tooth.
5. Selecting a suitable cutting fluid can solve the chip adhesion problem of stainless steel and make it smooth chip removal, thereby reducing the surface roughness of the hole and improving the durability of the tool. Generally, it is advisable to use vulcanized oil. Adding 10% to 20% CCl4 to vulcanized oil or adding 20% to 30% CCl4 to lard will have a significant effect on reducing surface roughness. Since CCl4 is harmful to the human body, it is advisable to use a mixture of 85% to 90% vulcanized oil and 10% to 15% kerosene. When the diameter of the reamer is large, internal cooling can be used.
6. Carefully pay attention to the reaming process and strictly check the runout of the cutter teeth, which is the key to obtain uniform reaming. During the reaming process, pay attention to the shape of the chips. Due to the small reaming allowance, the chips are in the form of foil rolls or very short spiral coils. If the chips are of different sizes, some are in the form of fine powder, and some are in the form of small blocks, it means that the reaming is uneven. If the chip is in the shape of a strip of spring, it means that the reaming allowance is too large. If the chip is needle-like or fragment-like, it means that the reamer has been blunted. To prevent chips from clogging, you should be diligent in observing whether there are sticky chips on the cutter teeth to avoid excessive hole diameter. When reaming a hole with a carbide reamer, hole shrinkage will occur. In order to prevent the hole from being roughened when the tool is retracted, the situation can be improved by increasing the lead angle.
If you need the stainless steel reaming service of CNC lathe machining to produce stainless steel reaming parts or other lathe machining part, please contact us.


Stainless Steel Reaming Parts,Stainless Steel Reaming Service,Lathe Machining Part,Cnc Lathe Machining

Pro Success Development Limited , https://www.prosuccess-metal.com