Guowu Dongfeng Tianjin 20m aerial work vehicle Announcement model: Chusheng CSC5120JGKD20V aerial work vehicle Chassis configuration: 4×2 drive, D530 flat head one row semi-standard top cab, ISD180 50 electronically controlled common rail engine (WHTC), wheelbase 4700mm, charged heating cold starter, all steel 160L fuel tank, electronic accelerator pedal, muffler The exhaust port is blown toward the side, Φ395mm push-type diaphragm spring clutch, Dongfeng 6-speed DF6S900 gearbox, head speed ratio 7.967, the highest grade is overspeed, 4.5T front axle, 9T rear axle, main reduction ratio 5.286, frame Longitudinal beam section 250×80×(7+4)mm, leaf spring number 7/9+6, 9.00R20 radial tire, automatic adjustment arm, Dongfeng Technology four-channel ABS, semi-floating cab rear suspension, hydraulic machinery Flip, colorless laminated front windshield, electric glass lifter, central control door lock, channel type instrument panel, with air conditioning, cruise system, remote throttle port and PTO interface without device, reserved for BDS (Beidou) / The vehicle recorder terminal interface of the GPS satellite positioning function. Three-section folding arm, the maximum working radius is 9 meters, the maximum working height is 20 meters, 360 turns, the maximum lifting weight is 1 ton, the extension of the telescopic boom is 2 meters, the maximum lifting height is 11.5 meters, and the rated load of the basket is equal to less than 200 kg. With emergency power unit. ã€The main technical parameters】 Product trademark Chusheng Announcement batch 293 Product Name CSC5120JGKD20V Aerial Work Platform Product number ZMSP15DW010 Total mass (Kg) 11505 Tank volume (m3) Rated load mass (Kg) Dimensions (mm) 9500×2490×3820 Curing quality (Kg) 11310 Cargo size (mm) × × Rated passenger (person) Quasi-trailer total mass (Kg) Number of passengers in the cab (person) 3 Load mass utilization factor Approach angle / departure angle (°) 20/10 Front overhang / rear overhang (mm) 1440/2560, 1440/2260 Number of axes 2 Wheelbase (mm) 3650, 3800, 4200, 4500, 4700, 5000 Axle load (Kg) 4400/7105 Maximum speed (Km/h) 98 Other 1, the car is stretched to 800mm. Side and rear protection are made of cold-formed steel Q235, side protective bolts; rear protective welding, section size (mm): 230 × 30, height 450mm from the ground. Appearance spray color can vary. 2, with the chassis optional cab, ABS model / manufacturer: 3631010-C2000 / East Cochnoor commercial vehicle brake system (Shiyan) Co., Ltd. Environmental Notice: Serial number: 1 Vehicle model: CSC5120JGKD20V Production company name: Xiagong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd. Vehicle Name: Aerial Work Vehicle Engine model: ISD180 50 Engine production plant: Dongfeng Cummins Engine Co., Ltd. Trademark: Chu Sheng Stage: 5 cars Category: Heavy-duty vehicles with compression-ignition engines Open date: 2016-8-16 Exemption album: Model C: SC5120JGKD20V Model: aerial work vehicle Atlas: 2017, Volume 1, Total 54th, 188 pages Main features of the product 1.H-type leg, three-section arm type, high-strength steel plate is used in some key parts; 2. Work bucket balance mode: external tie rod forced balance; 3. Install four H-type hydraulic legs with the car, the span is large, the stability is stronger, the legs can be independently telescopic, and can be linked, with the legs flashing lights, used for the legs when working, Emitting a light alarm signal; 4. There is an interlock between the upper part and the outrigger operation. The legs are not open and cannot perform all the operations on the upper part; 5. The lifting system adopts three-section folding arms, and the working platform can realize 360-degree rotation. 6. This car has hooks and hooks for 1 ton (hook telescopic 800mm-1000mm); 7. Operating system: There are two upper and lower operating tables, 360° all-round rotary turntable, with operating system on the upper and lower sides, and control device in the work bucket, which can be controlled to lift and rotate in the work bucket; 8. Work bucket rated load 200kg. 9. There are safety emergency systems in the lower part; 10. The lift truck has simple structure, convenient operation, safety and reliability, and beautiful appearance. It is widely used in high-altitude operations of municipal, electric power, street lighting, advertising, photography, communication, gardening, transportation, industrial and mining, docks and other systems.
LED Housing FEATURES:
This process is as integrated structure, and mostly we adopt "cold-forge" process. We insert the material of Aluminum alloy pour into the Cold chamber die-casting machine by machine hand. LED Housing LED Housing,Die Casting Housing,Motor Housing Zheke Mould Technology Co. Ltd. , http://www.zkdiecasting.com
By casting, through this process, we can produce Heat Sink with accurate dimension, strong surface and reliable structure. And the fin could be made higher, so that the area of thermal dissipation is expanded. One of the classic application is in field of LED.
â— Highly Compact Curved Fins Maximize Surface Area
â— Material can be formed in multiple dimensions
â— Round Pins, holes and standoffs formed in the tool in a single operation
â— Round Shapes (ideally suited for LED Cooling)