Industry Outlook: In the context of the revenue multiplication plan, China will enter a stage of consumption upgrading. In 2014, the LED industry will begin to reshuffle, and the probability of surviving in the future of enterprises with a turnover of less than 10 million is not significant. With the maturity of domestic LED technology, the cost performance of LED lighting products is gradually approaching or even lower than traditional lighting, and the acceptance of consumers is gradually increasing. In 2013, it was considered by many people in the LED industry to be the best year. The sales of products have been going all the way, but the problems of product homogenization, price war, low gross profit and so on have also plagued the development of the whole industry. The LED Industry Research Institute (GLII) predicts that the output value of China's LED industry will reach 263.8 billion yuan in 2013, an increase of 28. over the next five years. In addition to indoor and outdoor, automotive lighting, special lighting, other areas will enter a slow growth. period. Comprehensive development of the industrial chain Since the launch of the Ten Cities in the Ministry of Science and Technology in 2009, the domestic LED industry has ushered in a boom in investment, and various capitals have swarmed in, especially in the upstream areas of sapphire and epitaxial chips. Upstream, the domestic sapphire production value ranks first in the world, and the future output value will be the first in the world. The number of MOCVDs is the highest in the world, and the future output value will remain the first in the world. In 2013, the total number of domestic MOCVD reached 972 units, but the profit of a single unit still has a large gap compared with multinational companies such as Philips and Osram. The quality and cost-effectiveness of domestic chips have increased rapidly. This has also drastically lowered the price of imported chips, which has led to the inability of many chip factories in Taiwan to exist independently. It must rely on production in China and sales in the Mainland. The fact that Taiwan’s Kellett and Crystal’s collapse last year also confirmed this. In the middle of the package field, China's LED packaging industry has already achieved considerable economic scale and become one of the world's major LED packaging production bases. Domestic packaging devices occupy the vast majority of the domestic market, and the proportion of imported packaging devices in the Chinese market is rapidly decreasing. There will be no more than eight imported device brands in the future, and domestic devices will occupy a major domestic market share, because domestic prices are much lower. Some of the domestically packaged devices are exported to foreign countries, and domestic packaging manufacturers have begun to OEM (OEM) to foreign manufacturers. This also shows that domestic devices have reached a high cost performance, China's LED packaging is going global. Lighting demand is the biggest cake in the LED application market. Since last year, many upstream and midstream companies have begun to enter the lighting market. Sanan and Ganzhao have set up lighting subsidiaries. Downstream, China's export lighting will account for most of the global market, with an estimated ratio of around 70. Most of the foreign LED lighting will be OEM by Chinese enterprises. Multinational lighting companies in China only Philips and Osram can compete with Chinese companies in China. In the next five years, the domestic LED industry has undergone a lot of progress in technology, scale, products, etc., but it also faces many problems. LED overcapacity, numerous companies, and product performance levels are not Qi, the price war has become increasingly fierce, many companies do not have a clear and clear enterprise and product positioning. According to Jiuzheng Building Materials Network, the LED industry will be reshuffled in the next five years. Whether it is a listed company, a state-owned enterprise or a private enterprise, it will face a very serious situation in the next five years. Especially in the next three years, the LED industry big fish to eat small fish, fast fish to eat slow fish, will be the normal state of the industry, because the market space is so large, this is the inevitable result of market rules. Non-listed companies may be largely eliminated or integrated. GLII believes that Chinese local chip manufacturers will eventually survive no more than 12, and domestic MOCVD will not survive more than two. Most upstream companies die and the survival rate is around 30. According to GLII survey data, the number of companies involved in LED packaging in China reached 1,750 in 2012. These 1750 homes can survive around 40. Some of these enterprises will become large-scale manufacturers, especially those companies that have already listed, such as Ruifeng Optoelectronics (300241, shares), Hongli Optoelectronics (300219, shares), will continue to grow, and SMEs will be freed after they are eliminated. The space will be given to large and medium enterprises. After several years of development of LED lighting, the penetration rate is constantly improving. In 2015, the penetration rate of LED lighting will exceed 60. At the end of 2018, the output value of LED lighting accounts for 80% of the total output value of lighting. Traditional lighting companies are slow to transform into LEDs, and forming a strategic alliance with packaging companies is the way out. The death rate of the entire LED lighting company exceeds 50, and the proportion of LED lighting companies will exceed the proportion of traditional lighting. For outdoor lighting, LED lighting companies have advantages in outdoor lighting. Listed companies and state-owned enterprises will account for most of the market; lighting, traditional lighting companies will still have a larger market share. LED lighting and packaging companies that have already listed will have the advantages of capital and talents. In the pattern of the industry in the next five years, I believe that 2014 is a year of real hands-on shuffling. The companies that have been shuffled have a low probability of surviving in the future with a turnover of less than 10 million. In 2015, the industry integration was very intense. In 2016, a large number of middle and lower reaches enterprises will withdraw, and the differentiation between the middle and lower reaches will be particularly obvious. 2017 is the year of decisive victory. Who is the leader and leads the industry development at a glance. By 2018, the entire LED industry has reached the market's basic supply and demand balance, that is, the dynamic supply and demand balance, the market is in a fine-tuned state, but the market size of the lighting industry has begun to shrink, a new round of reshuffle is about to begin. Reminder: "Follow the WeChat public number nine positive lighting network; pay attention to courtesy, scan code to send millions of business opportunities! Jiuzheng lighting network QQ group"

Control handleplastic handle

The handle is a kind of mechanical accessory, which is convenient for workers to operate machinery. Mechanical accessories industry handles have two main types of materials are plastic, steel parts. Steel parts are machined by machine and differentiated from castings. The Plastic Handle is divided into thermoset plastic and thermoplastic plastic.
According to handle material is divided into: bakelite handle, iron handle, zinc alloy handle, steel handle and so on.
According to the working performance of the handle, it can be divided into: handle, turning handle, locking handle, adjustable handle, folding handle, handle sleeve, handle lever, handle seat, swinging handle, three-ball handle, etc.
According to the handle shape can be divided into: handle, straight handle, turn the handle of surface, turn the handle of the little turn the handle, the steel chrome plated handle, handle the seventh, peulthai the (adjustable set handle), folding handle, long handle, the handle cover, oval handle cover, handle the ball, rod, joystick, disc handle, lock handle, positioning controller, three goals, positioning joystick, ball head, oblique cone column joystick, etc.


Plastic Injection Control Handle

Plastic Injection Control Handle,Plastic Handle,Plastic Handle Grips,Molded Plastic Handles,Control Handle

Timeplex Industrial Limited , http://www.timeplex-hk.com