Metal Steel Floor Decking Roll Forming Machine
PRODUCT INFORMATION
Brief introduction:
The roll forming machines can produce various of steel roof and wall panel, it is a new building materials, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.
The chart of Process Flow and components
Manual uncoiler- Roll forming machine- Computer control system- Hydraulic control system- Form cutter
Advantages of the roofing sheet roll forming machine
1. High efficiency
2. Lower cost
3. Long life time: 30years
4. Low energy consumption
5. PLC control, Panasonic or Siemens or eura
6. Easy operation
7. Beautiful and best quality
Â
| 1. Genaral | |
| Material: | Galvanized Coil, Aluminum |
| Material Thickness: | Â 0.3-0.5mm |
| Main roll forming machine Power: | 11 KW |
| Forming Speed: | 10-12m/min |
| Feeding width: | 229mm |
| Production line G/W: | 12.5T |
| Production line length: | about 38m |
| 2. Working Flowing | |
|
 | |
| 3. Technical Parameter | |
| 3.1 Decoiler | |
| Decoiler Type | Manual |
| Loading capacity | 3Ton, Impassive to expanding |
| 3.2 Roll Forming system with feed panel unit | |
| Axis Diameter | 50 mm |
| Forming Roller station | 36+1 groups |
| Main Axis material | First grade 45# steel,heated and quenched |
| Roller material | First grade 45# steel, Hard Chrome Coated, 2um heated and quenched |
| Pillar size | 42*45mm |
| Forming Speed | 10-12 m/min |
| Drive Type | Gear box |
| Machine Frame stand | Welded structural steel, thickness 12mm |
| 3.3 Cutting Device | |
| Cutting type | Panasonic Servo tracking cutting |
| Cutting system power | 2.2KW |
| Cutting length tolerance | ±0.5mm |
| Â | Â |
| 3.4 PU Foaming Untit | |
| PU Raw material tanks | A+B China good brand |
| Â | Â |
| Â | Â |
| 3.5 Electrical System | |
| PLC system | Japan PANASONIC/DELTA |
| Length Controller | Â Japan PANASONIC |
| Operation | Touch Screen PANASONIC/DELTA |
| Inverter | Japan PANASONIC/DELTA |
| Voltage | 380V/50Hz/3P |
Galvanized Steel Pipe is a kind of Carbon Steel Pipe, mostly welded pipe,Galvanized steel pipes are divided into cold galvanized steel pipes (electro galvanized steel pipes) and hot-dip galvanized steel pipes. At present, hot-dip galvanized steel pipes are mainly used in fire protection, electric power and highways.
Galvanizing can increase the corrosion resistance of steel pipes and prolong their service life. Galvanized pipes are widely used. In addition to being used as pipeline pipes for water transmission, gas, oil and other general low-pressure fluids, they are also used as oil well pipes and oil transmission pipes in the petroleum industry, especially in offshore oil fields, as well as pipes for oil heaters, condensing coolers, coal distillation oil washing exchanges of chemical coking equipment, as well as trestle pipe piles, support frames of mine tunnels, etc.
Hot-dip galvanizing (HDG), as referenced is the process of dipping fabricated steel into a kettle or vat of molten zinc.
Hot-dip galvanizing (HDG) is the process of coating iron, steel or ferrous materials with a layer of zinc. This done by passing the metal through molten zinc at a temperature of 860°F (460°C) to form zinc carbonate (ZNC03). Zinc carbonate is a strong material that protects steel and can prevent corrosion in many circumstances. Hot-dip galvanizing can be carried out cheaply and in large batches.
Customized Special Shape Steel Pipe,Special Shape Steel Pipe,Welded Oval Steel Pipe,Stainless Steel Welded Oval Pipe
SHANDONG HUITONG STEEL CO.,LTD , https://www.cnhuitongsteel.com