The main function of road wreckers is to handle the vehicles on the roads, especially those on the highways, and check and transport the accident vehicles that can not be driven in time to ensure that road traffic is normally restored. Heavy-duty road wreckers are wreckers with a capacity of over 10 tons and have a superb load capacity. They are mainly used for consignments of large-scale accident vehicles. Heavy-duty road wreckers are bulky, have large tonnages, and are difficult to operate. When using heavy-duty road wreckers, the following issues need to be addressed.

重型道路清障车作业时需要注意的问题1.jpg

First, pay attention to the control of the arm of the vehicle. Heavy-duty road wreckers are usually equipped with support arms so that it is easy to lift serious vehicles into the car's platform. The longer the length of the support arm is, the smaller the weight can be lifted. When operating with the support arm, it is necessary to control the operation distance. The wrecker should be as close as possible to the accident vehicle to prevent the weight range beyond the support arm from being able to withstand. . In addition, when working with the support arm, the working angle needs to be adjusted, and the lifting process is prone to shaking. To be able to lift the accident vehicle smoothly, the support arm needs to be controlled during operation. Safe, smooth and accurate placement of the accident vehicle on the wrecker and efficient completion of the accident handling task.

Second, pay attention to whether the weight of the transported vehicles exceeds the lifting weight of the wrecker. The tonnage of heavy-duty road wreckers is much larger than that of ordinary wreckers. However, if a large-scale traffic accident occurs, the wrecker's capacity may not be able to meet the demand. Therefore, the wrecker must be used before the wrecker. The weight is evaluated and the weight of the consignment is not only less than the lift weight rated by the wrecker, but also cannot be greater than the weight of the wrecker, otherwise it will damage the chassis of the wrecker and affect the subsequent use of the wrecker.

Third, pay attention to the use of reasonable ways to remove obstacles. Wreckers generally have two modes of transportation: consignment and dragging. Consignment is for those situations where the accident is more serious and causes the vehicle to be unable to travel. Generally, such a vehicle needs a wrecker to remove it; dragging is to damage the vehicle. It is not serious. It only affects the appearance of the vehicle. The vehicle itself can also travel. At this time, the wrecker will take the vehicle away. The method of dragging and pulling is simpler than consignment. When clearing, it is necessary to choose the way to transport the vehicle.


 1.Metal Stamping, cold stamping,hot stamping 
 2.OEM,can be customized 
 3.Alloy, Aluminum,Brass,steel ,copper,stainless steel,mild steel,carbon steel.
 4.Durable
 5.Tolerance Control: from +,-0.003MM 

 6.After-sales-service: take 100% responsibility for any quality issues!

steel stamping


Steel Stamping

Steel Stamping,Precision Stamping,Steel Part,Metal Stamping

Baoding Henglian Mechanical Co.,Ltd , https://www.hengliancasting.com