SZ-4SZ-4 magnetoelectric vibration speed sensor

The SZ-4SZ-4 magnetoelectric vibration speed sensor, vibration sensor and vibration monitor can be used for continuous long-term monitoring and is suitable for measurement of mechanical vibrations such as steam turbines, fans, pumps and coal mills. The working principle is based on a primary component that converts mechanical energy into electrical energy. It is fixed on the bracket by two coils, and a magnetic steel in the middle is connected to the casing through a spring, and the magnetic steel moves in the line. The magnetic lines of force are cut, thus generating an induced electromotive force. The voltage is proportional to the speed of the casing, which is called the vibration speed sensor. The vibration sensor produced by Zhengzhou Hangke has small volume, good sealing and long service life. Due to the double coil structure, it can superimpose the effective signal, and the interference signal attenuation effectively improves the anti-interference ability.

1. Measuring range: Frequency: 10 ~ 300Hz
Amplitude: 0 to 200um 0 to 500um 0 to 800um (peak to peak)
Intensity: 0 ~ 20mm / s 0 ~ 25mm / s 0 ~ 50mm / s (true RMS)

2. Measurement accuracy: ±0.5, linear error ≤1%FS
3. Measurement method: vertical or horizontal
4. Output signal: current output: 4 ~ 20mA (load ≤ 1KΩ)
5. Ambient temperature: -10 ~ 65 ° C (relative humidity ≤ 85%)
6. Power supply voltage: DC24V (power consumption ≤ 3W)
7. Dimensions: 35 × 75 (mm)
8. Fixed screw hole: M10×1.5×10mm

SZ-4SZ-4 magnetoelectric vibration velocity sensor has high resolution and temperature adaptability, and is suitable for seismic exploration in various environments. Mainly installed on the bearing caps of various rotating machinery, such as steam turbines, compressors, fans and pumps. It is an electromagnetic sensor that cuts magnetic lines by a moving coil and outputs a voltage. Therefore, it does not need to supply power during operation, and the explosion-proof vibration speed sensor is an inertial sensor. The vibration signal is converted into an electrical signal by the principle of magnetoelectric induction. . It is mainly composed of magnetic circuit system, inertial mass, spring damping and other parts. A magnet is rigidly fixed to the sensor, and the inertial mass (coil assembly) is suspended by a spring element. jobs.

Airless Bottle

An airless bottle is a type of packaging for cosmetics, skincare products, or other liquids that uses a non-pressurized vacuum for dispensing the product. This design helps to keep the product fresh by preventing air exposure, which can degrade the product over time. Large Lip Gloss Tube.Airless Pump Bottles.The bottle has a diaphragm that rises to evacuate the product. When the bottle is filled, the material stored inside the bottle is preserved and maintains its integrity until used up.Airless Pump Container. Airless bottle technology helps to extend the shelf life of the skincare product, lotion, or serum, making them more effective for a longer period.Big head Lipstick Tube

Airless Bottle,Airless Pump Bottles,Airless Cosmetic Bottles,Airless Pump Container,Large lip gloss tube,Big head lipstick tube

Kunshan Muchun Electric Co., LTD , https://www.muchunelectric.com