Zy9000-D3 Zoyer Direct Drive Auto Trimmer High Speed Lockstitch Industrial Sewing Machine
1, computer high speed direct drive lockstitch sewing machine with integrative computer controller, can be used when it's plugged in electricity, leaving out the problem of all kinds of pulugs chaos and installing
 2, It  has the sewing patterns of auto-trimmer automatic needle positioned, automatic sitch storage, soft start, filling needle and so on.
3, it used good feeding machanism, which greatly improves the production efficiency,
4, it's internally installed bobbin winder which is elegant and easy to handle
5, low noise, no radiation and environmental friendly
6, it can prevent oil floing from head to servo control system so that reducing stoppage and extending service life
| 1Â | normal computer lockstitch with auto nnedle position and with auto-trimmer | ZY9000-D2Â |
|  2 |  computer lockstitch with auto-trimmer and auto-thread clamp |  ZY9000-D3 |
| Â 3 | Â Â computer lockstitch with auto-trimmer and auto-thread clamp and with auto-foot lift | Â ZY9000-D3 |
| Â 4 | Â Heavy duty computer lockstitch | Â ZY9000H-D |
Grain Seed Palm Almond Walnut Apricot Sheller and Peller and Huller
A level of shelling, roller gap can be adjusted, apricot raw material size is not the same, take off the large adjustment gap and then take off as a cycle ..The roller gap should be 1-1.5mm smaller than the apricot kernel. (If apricot kernel size is mixed together, large apricot kernels have a 15 mm diameter in the flat, 12 mm in the flat, and a small 9 mm in the flat. Adjust according to the raw materials: 14 mm off the first roll gap. The large, large apricot nucleus is removed from the shell and the small apricot kernels are leaked at the same time. The apricot nucleus, which has been removed from the shell, is separated from the apricot kernel that has not been detached from the shell by a sizing screen under the shelling machine. Unopened apricot kernels, from the lower layer of the screen, the apricot kernel almond mixture after opening the shell, and then the second time to remove the roller gap 11mm off the third roll off the gap 8mm off Finished small, once finished. Reference, according to the physical material to adjust the gap to achieve no broken kernel as well,)
Technical Data:
| Model |
Productivity (T/H) |
Power (kw) |
Weight (kg) |
Dimension (mm) |
Sieve dimension | Mark |
| HLD-300 | 3-5 | 2.5 | 260 | 1900X800X1250 | / | Environment friendly |
Almond Sheller,Almond Huller,Corn Sheller Machine,Electric Corn Sheller
Hebei HELIDA Grain Selecting Machinery Technology Co., Ltd. , https://www.grainseedscleaner.com